Industrial Roofing Header

Multiwall Industrial Roofing

Multi-wall industrial roofing Polycarbonate Thermo-glazing is perfect for applications requiring material which offers high light transmission, thermal insulation, light weight yet amazingly strong, high shock resistance, flame retardant, great economy, vandal resistance and design flexibility.

Industrial Roofing Feat Top
Industrial Roofing Frame Top
Multiwall Industrial Roofing Polycarbonate Sheet
Industrial Roofing News HeaderIndustrial Roofing Feat Side
Industrial Roofing Footer
Copyright 2017©
Home | Contact Us |
Sales to the general public are welcome!

HOME IMPROVEMENT: Multi-wall Industrial Roofing Polycarbonate is a great choice
for easy do-it-yourself projects like window replacements, shower enclosures, hobby green-houses, partitions, light covers, patio covers, carports and more. 

HORTICULTURAL:
Multi-wall Industrial Roofing Polycarbonate is the preferred glazing of choice for greenhouse coverings where good thermal insulation is necessary together with high light transmission.

ARCHITECTURAL GLAZING:
With the ability to be cold-formed into arches, Multi-wall Industrial Roofing Polycarbonate offers architects design freedom that is not possible with other glazing. Consider the possibilities of using Multi-wall Industrial Roofing Polycarbonate for walkways, indoor shopping centers, swimming pool coverings, skylights, and other space enclosures.

INDUSTRIAL BUILDING:
Multi-wall Industrial Roofing Polycarbonate for various glazing applications, skylights, walkways, windows, shelters, and insulated industrial roofing.

CONDENSATION CONTROL

A factory applied condensation control is available on 8 mm, 4 foot wide Macrolux industrial roofing polycarbonate panels. Reducing surface tension, the condensation control allows water to spread into a thin sheet rather than form into droplets. It is available for all applications from greenhouses to backyard patio covers.

EASY TO INSTALL

Industrial roofing multi-wall Polycarbonate won't crack or split when cut or drilled.

EXTRA WIDE INDUSTRIAL ROOFING PANELS

Standard widths of 4 feet and 6 feet are available with lengths up to 39'.

LIGHT TRANSMISSION

Multi-wall Industrial Roofing Polycarbonate offers optimal light transmission thanks to the different standard finishes (clear, bronze, and opal) which allow light transmission from 83% to 42%. In addition, there is positive light diffusion due to the rib structure. It is essentially opaque at all wavelengths below 385 nanometers limiting the damaging effects of UV light. Multi-wall Industrial Roofing Polycarbonate has a clear co-extruded outer surface which provides high stability against the effects of UV radiation and gives excellent durability to outdoor weathering. This unique protection insures long term optimal quality under intensive UV exposure.

LIGHTWEIGHT

Weighing just 1/8 the weight of glass, these industrial roofing polycarbonate panels are self supporting and do not require the extensive structural support that a heavier glass wall or skylight needs.

FLAMMABILITY
Multi-wall Industrial Roofing Polycarbonate sheet is classified as Self-Extinguishing. Compared with other thermoplastic products used in the building industry, it will not support flames. Above all, it does not give off toxic gases.

IMPACT RESISTANCE

Among the thermostatic products used in the building industry, Multi-wall Industrial Roofing Polycarbonate has the highest impact resistance. You can be assured that from transport to installation, it will maintain its durability. Even when exposed to elevated temperatures over a long period of time, it will maintain its structural integrity. On-site, it will not crack or splinter, assuring you a high degree of safety.
Multi-wall Industrial Roofing Polycarbonate is so strong it withstands the impact of 16 lbs. dropped 25 feet on an 8 mm panel with no breakage. It will maintain its impact strength over a wide temperature range from – 40F to 250F.

LOAD RESISTANCE

A wide range of applications is available with Multiwall Industrial Roofing thermoglazing. In order to evaluate the loads for each application, a reference diagram has been prepared for sheets supported on 4 sides with purlin spacing. This diagram is valid only when the following conditions are followed:

Correct calculation of expansion in order to provide for the necessary allowance in the framing. The thermal expansion coefficient is 0.0000375 in/in °F.

Chemical Resistance of Polycarbonate @ 73° F - The list below indicates the resistance of polycarbonate to chemicals and various products. Resistance can be effected by the chemicals concentration, duration of exposure, degree of pressure and temperature at time of contact.

RESISTANT
Carbon Dioxide, moist
Citric Acid 10%
Ethyl Alcohol, 98% pure
Hydrochloric Acid 20%
Kerosene
Ozone
Propane Gas
Sulfuric Acid, 50%
Ajax Cleanser
Laundry Soap
Soft Soap
Automatic Switch Grease
Silicone Oils
Fish Oil
Paraffin
Silicone Fluid
Gypsum
Insulating Tape
Putty
Rubber
Cement
Floor Polish
Natural Rubber
Ocean Water

CONDITIONALLY RESISTANT
Isopropyl Alcohol
Petroleum
Sulphur Dioxide
Diesel Oil
Heating Oil
Jet Fuel (JP4)
Turpentine
Varnish
All Purpose Glue
Battery Acid

NON-RESISTANT
Acetone
Ammonia
Brake Fluid
Drilling Oil

Install the sheets with the ribs running vertically and following bending specifications in bent applications. Washers and sealing materials must be compatible with industrial roofing polycarbonate.

PRACTICAL ADVICE

Multiwall industrial roofing polycarbonate is supplied with a protective PE film on both sides which should be kept on until work is completed. The U.V. protected side is to be faced towards the sun and is marked with a white printed film or light blue film and a sticker saying multiwall polycarbonate sheet. Multiwall industrial roofing polycarbonate crates or sheets should be stocked in an area not exposed to the sun which could make the removal of protective film difficult.

Stiff fixing by means of adhesive or putty is to be avoided. Top and bottom ends of a sheet must always be sealed by means of the proper polycarbonate profiles or an adhesive aluminum tape to prevent dust or dirt penetrating the inside of the ribs and will help reduce condensation.

Multiwall Industrial Roofing Polycarbonate
Multiwall Industrial Roofing Polycarbonate Load Chart
ITEM $350 - $1,499 $1,500 - $2,499 $2,500 - $3,999 $4,000 - $14,999 $15,000+
4mm clear 20,000 square foot minimum for 4mm & 4.5mm Polycarbonate Sheet. PLEASE CALL
4mm colors PLEASE CALL
4.5mm clear PLEASE CALL
4.5mm color PLEASE CALL
6mm clear $1.55 $1.48 $1.42 $1.33 $1.27
6mm colors $1.73 $1.65 $1.56 $1.48 $1.40
8mm clear $2.07 $1.86 $1.76 $1.67 $1.56
8mm colors $2.24 $2.02 $1.92 $1.81 $1.70
10mm clear $2.42 $2.19 $2.07 $1.96 $1.84
10mm colors $2.65 $2.40 $2.28 $2.15 $2.02
16mm clear $3.80 $3.50 $3.31 $3.13 $2.94
16mm colors $4.14 $3.83 $3.62 $3.43 $3.22
25mm clear $5.64 $5.36 $5.08 $4.81 $4.53
25mm colors $6.15 $5.85 $5.56 $5.24 $4.95
32mm clear PLEASE CALL PLEASE CALL PLEASE CALL PLEASE CALL PLEASE CALL
32mm colors PLEASE CALL PLEASE CALL PLEASE CALL PLEASE CALL PLEASE CALL

Approximate thickness: 6mm = ¼”, 8mm = 5/16”, 10mm = 3/8”, 16mm = 5/8”, 25mm = 1”, 32mm = 1.25”

Most colors & sizes are available in 4 foot or 6 foot widths. All colors & sizes are available in any length up to 39 feet.

$350.00 Minimum Polycarbonate order (excluding freight & crate charges) .

CLEAR HEAVY DUTY POLYCARBONATE PROFILES (trim):

Multiwall Industrial Roofing Polycarbonate Accessories
Multiwall Industrial Roofing Polycarbonate Sheet Pricing